Home   >   Industry News

What should be paid attention to when installing the system doors and windows?


When the family replaces the doors and windows of the system, they are not familiar with the replacement and installation of doors and windows. Therefore, for families who need to install them, how to check the installation quality of doors and windows has become something that needs to be learned and understood.

During and after the installation of the doors and windows of the system, in addition to observing the surface quality of the doors and windows of the system, it is also necessary to pay attention to the procedures performed by the door and window installers, observe whether qualified building materials are selected, and avoid using fake and inferior building materials to affect the long-term use of doors and windows after installation. .

At the same time, in the installation of doors and windows, the installation of system doors and windows generally needs to go through the door and window installation processes such as framing, connection stability, caulking and sealing, and inspection, and these related processes directly determine the quality and durability of our doors and windows.

This article mainly describes the installation process of doors and windows, and the installation position is the primary issue, which should be described as a key point and should be highly regarded. Many people in the industry believe that the installation and installation position of the windows are not important, as long as the windows are installed in the openings (in the middle and outside, similar to bay windows)

In the installation of system doors and windows, the vertical frame is a very critical part, which directly determines whether the window is beautiful and practical. According to the door and frame position line measured on the opening where the system doors and windows are to be installed, be sure to place the center line of the door and window frame on the position line or the inner side of the position line.

As we all know, most windows are currently installed in the middle of the hole. This is just one of the installation methods. In fact, the installation of windows is actually divided into three types:

The window is installed in the middle of the hole;

Windows are installed at the outer edge of the opening;

The window is installed outside the opening.

window fixing

Due to the different installation positions, the fixing method of the structure is also different. The fixing method is directly related to the safety and reliability of the doors and windows, as well as the displacement and expansion of the building. Therefore, it is very important to ensure the safety of the windows.

The above are the precautions for the installation process of the system doors and windows, and share them with you. Avoid problems during the installation of doors and windows, which will make everyone suffer, and at the same time ensure the comfort of everyone's doors and windows.